The radiator is still the original and while it looked to be in reasonable condition it was decided to replace it. An aluminium one was chosen in the same shape. But it needs to move forward to make more room for the new electric fan. This is to go behind the radiator to "pull" the air through for maximum cooling.
So new mounts need to be fabricated and also mounting for the A/C condensor. A shroud is needed too to direct the maximum amount of air possible through the radiator.
Here is the radiator mounted temporarily in place to measure for the new brackets etc.
Also the front apron panel in place to check that all will have clearance.
Bolted in now to fabricate brackets to mount the condensor in front of it.
Brackets made and all bolted up. Looks to be okay.